Table of Contents
Advertisement
M3062PT2-EPB User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Upper panel LED
of emulator
Init dialog box of emulator
debugger displayed
MCU Setting dialog box of
emulator debugger
Program window of emulator
debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J0868-0200 Rev.2.00 January 16, 2006
http://www.renesas.com/en/tools
Not normal
1. Check the connection of power supply cable.
See "2.5 Connecting the Power Supply for the Emulator "
Normal
(page 24).
2. Check that the power is properly supplied to the use system.
"
See
3. Restart the emulator system.
Not normal/Error displayed
1. Check the operating environment etc. of the emulator
Normal
debugger.
See the user
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "5.2.(2) MCU Setting Dialog Box Does Not Appear at
Normal
Emulator Debugger Startup" (page 96).
Error displayed
Normal
See "5.2.(3) Errors Occur at Emulator Debugger Startup" (page 97).
"
2.7 Downloading Firmware
(page 27).
'
s manual of the emulator debugger.
5. Troubleshooting
Page 94 of 102
Advertisement
Table of Contents
