Renesas M16C/30P User Manual page 52

Emulation probe for m16c/62p and m16c/30p groups
Table of Contents

Advertisement

M3062PT2-EPB User's Manual
(2) Debugging Information tab
(3) Emulator tab
REJ10J0868-0200 Rev.2.00 January 16, 2006
3. Usage (How to Use the Emulator Debugger)
Specifying the compiler used and the object format
Specify the compiler you are using and the format of the object file
output by the compiler.
- Compiler
Select the compiler you are using.
(By default, the C compiler from Renesas is selected.)
- Object Format
Select the format of the object file that is output by the compiler
you are using.
Specifying
the
method
information
There are two methods for storing debug information: on-memory
method and an on-demand method. Select method for storing debug
information. (By default, the on memory is selected)
When selecting the on demand method, check the "On Demand" check
box.
- On Memory
Debugging information is stored in the internal memory of your
computer. This method is suitable when the load module (user
program) size is small.
- On Demand
Debugging information is stored in a reusable temporary file on the
hard disk of your computer.
Because the stored debugging information is reused, the next time
you download the same load module it can be downloaded at high
speed. This method is suitable when the load module (user
program) size is large.
Specifying the target clock
Specify the clock sources supplied to the MCU (main clock and sub
clock). Select the appropriate clock sources according to the clock
used by your target MCU.
- Internal (default)
Emulator PC7501's internal clock
- External
User system clock
- Generated
Clock created in PC7501
The option you have specified here remains effective the next time
you start up.
Selecting the event output/trigger input cable
Select input/output of the event output/trigger input cable of the
PC7501.
- Input from External Trigger (default)
Inputs the external trigger from the cable
- Output Events
Outputs events from the cable
"Input from External Trigger" is set at startup (the previous setting
becomes null).
for
storing
debug
Page 52 of 102

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3062pt2-epb

Table of Contents