Renesas M16C/30P User Manual page 46

M3062PT2-EPB User's Manual
2. Replace the oscillator circuit board (see Figure 2.22).
Figure 2.22 Replacing the oscillator circuit board
3. Reinstall the upper cover and secure the four screws of the PC7501.
Note on Replacing the Oscillator Circuit Board:
Always shut OFF power when removing the upper cover or replacing oscillator circuit board. Otherwise,
internal circuits may be damaged.
REJ10J0868-0200 Rev.2.00 January 16, 2006
The Figure on the left shows the oscillator circuit board.
Oscillator
circuit board
Unscrew the screw securing the oscillator circuit board.
Lift off the oscillator circuit board.
Attach another oscillator circuit board to the connector.
Secure the new oscillator circuit board with the screw.
CAUTION
2. Setup
Page 46 of 102