Table of Contents
Advertisement
M3062PT2-EPB User's Manual
1.4 Specifications
Tables 1.5 and 1.6 list the specifications of the M3062PT2-EPB.
Table 1.5 Specifications of the M3062PT2-EPB (1/2)
Applicable MCU
Applicable MCU mode
Maxi. ROM/RAM capacity
Applicable power supply
Maximum operating frequency
Emulation memory
Basic debugging functions
Real-time trace function
Real-time RAM monitor function
Hardware break function
Execution time measurement function Time between program start and stop
C0 coverage
External trigger input/event output
Host machine interface
Power supply to emulator
* Available to connect the host machine that supports USB 2.0.
With the USB interface, not all hardware (such as host machine, USB devices, USB hub) combination will work and
guaranteed.
REJ10J0868-0200 Rev.2.00 January 16, 2006
M16C/60 Series M16C/62P Group and M16C/30 Series M16C/30P Group MCUs
Single-chip mode
Memory expansion mode (NORMAL, 4MB)
Microprocessor mode (NORMAL, 4MB)
1. Internal flash ROM: 516KB
0F000h--0FFFFh, 80000h--FFFFFh
2. Internal RAM: 31KB
00400h--07FFFh
Vcc1 = Vcc2: 2.7--5.5 V
Vcc1 > Vcc2: Vcc1 = 5.0 ± 0.2 V, 2.7 V ≤ Vcc2 < Vcc1
3.0 to 5.5 V: 24 MHz (when using a PLL)
2.7 V: 10 MHz
1. Max. operating frequency of ROM area
2. External area (CS3# -- CS0# area) Minimum 4KB x 4 areas
- Maximum operating frequency (at 5.0 V) 0 wait:
- Maximum operating frequency (at 3.0 V) 0 wait:
- Download
- Address match break (max. 8 points)
- Software break (max. 64 points)
- Program execution/stop (allows free-run execution supporting software breaks)
- Memory reference/setting (reference/setting C-variables, run-time execution)
- Register reference/setting
- Disassemble display
- C-level debugging, etc.
- 256K-cycle bus information recordable
(Bus, external trigger, time stamp)
- 5 trace modes supported (Break/Before/About/After/Full)
- Can be recorded ON/OFF by events
- 4,096 bytes (256 bytes x16)
- Data/last access result
8 points (Execution address, bus detection, interrupt, external trigger signal)
Maximum/minimum/average execution time and pass count of specified four zones.
Count clock: Equal to MCU Clock or 16 MHz
8,192 KB (256 KB x 32 blocks)
External trigger input (MCU-dependent-voltage CMOS level x8) or event output
(break x1, event x7)
- LPT parallel (ECP, EEP, Byte/compatibility and Nibble/compatibility modes)
- USB (USB 1.1, full-speed)*
- LAN (10BASE-T)
Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)
1 wait:
2 wait, 3 wait:
1 wait:
2 wait, 3 wait:
Page 18 of 102
1. Outline
10 MHz
7 MHz
20 MHz
24 MHz
6 MHz
17 MHz
24MHz
Advertisement
Table of Contents
