Table of Contents
Advertisement
M3062PT2-EPB User's Manual
2.11 Selecting Clock Supply
2.11.1 Clocks
You can choose a clock supplied to the evaluation MCU by the Emulator tab in the Init dialog box of the emulator debugger.
Table 2.4 shows the clocks and their initial settings.
Table 2.4 Clock supply to the MCU
Clock
Main (X
-X
)
IN
OUT
Sub (X
-X
)
CIN
COUT
Notes on Changing the Clock Supply:
The clock supply can be set by the Init dialog box when starting up the emulator debugger or inputting CLK
command on the script window.
2.11.2 Using an Internal Oscillator Circuit Board
(1) Kinds of Oscillator Circuit Boards
The PC7501 comes with an oscillator circuit board OSC-3 (30 MHz). And an oscillator circuit board OSC-3 (16 MHz)
and an oscillator circuit board OSC-2 (bare board) are included with this product. If you use the internal oscillator
circuit board OSC-3 (16 MHz) or OSC-2 of the PC7501 as a main clock, choose "Internal" in the emulator debugger
after replacing oscillator circuit boards to change a clock supplied to an MCU.
REJ10J0868-0200 Rev.2.00 January 16, 2006
Display of
emulator debugger
Internal
External
Generate
Internal
External
IMPORTANT
Description
Internal oscillator circuit board
(OSC-3 or OSC-2)
Oscillator circuit on the user system
Internal generator circuit
(1.0--16.0 MHz)
Internal oscillator circuit
(32.768 kHz)
Oscillator circuit on the user system
2. Setup
Default setting
Yes
-
-
-
Yes
Page 44 of 102
Advertisement
Table of Contents
