Keithley 6485 Instruction Manual page 168

12-4 SCPI Signal Oriented Measurement Commands
D) MEASure[:<function>]?
<function>
This command combines all of the other signal oriented measurement commands to per-
form a "one-shot" measurement and acquire the reading.
When this command is sent, the following commands execute in the order that they are
presented.
•
•
When :CONFigure is executed, the instrument goes into a "one-shot" measurement mode.
See CONFigure for details.
When READ? is executed, its operations will then be performed. In general, an INITiate is
executed to perform the measurement and a FETCh? is executed to acquire the reading.
See :READ? for details.
= CURRent[:DC]
CONFigure:<function>
READ?
Model 6485 Picoammeter Instruction Manual
Configure and perform "one-shot" measurement
Measure current