3.4.5
Tile mounting
Drive sizes 3 to 4 can be tile mounted where limited mounting space is available. The drive is
mounted sideways with the side panel against the mounting surface as shown in Figure 3-11. The tile
mounting kit is not supplied with the drive, it can be purchased separately using the following part
numbers:
Size
Figure 3-11 Tile mounting
3.5
Enclosure for standard drives
Figure 3-12 Recommended spacing between the drives
Unidrive M/HS Frame 3 and 4 Power Installation Guide
Issue Number: 3
3
4
Enclosure
A
CT part number
3470-0049
3470-0060
27