Product Information; Introduction; Model Number - Emerson Unidrive M700 Installation Manual

2

Product information

2.1

Introduction

This guide provides the information necessary to install the following drive models:
Unidrive M600 to M702 frame 3 to 4
Unidrive HS70 to HS72 frame 3 to 4
This guide focuses on the drive power section, for example: electrical installation of the supply /
motor cables and mechanical installation of the drive.
For information about the drive control section, for example: parameter set up information, control
and encoder connections please refer to the Control User Guide.
2.2

Model number

The model numbers for the Unidrive M/HS product range are formed as illustrated below:
Figure 2-1 Model number
Identification Label
Derivative Electrical Specifications
M600 - 03 4
Product Line
Unidrive M600
Unidrive M700
Unidrive M701
Unidrive M702
Unidrive HS70
Unidrive HS71
Unidrive HS72
Frame Size :
Voltage Rating:
2 - 200 V (200 - 240 ± 10 %)
4 - 400 V (380 - 480 ± 10 %)
5 - 575 V (500 - 575 ± 10 %)
6 - 690 V (500 - 690 ± 10 %)
Current Rating:
Heavy Duty current rating x 10
Power Format:
A - AC in AC out (with internal choke)
D - DC in AC out (Inverter)
C - AC in DC out (Rectifier)
E - AC in AC out (without internal choke)
T - AC in AC out (12P rectifier plus inverter)
Unidrive M/HS Frame 3 and 4 Power Installation Guide
Issue Number: 3
Power
Reserved
Format
0
00078 A
Documentation
Customer Code
1 01 A
Optional Build
B 1 0 0
Reserved:
Conformal Coating:
0 = Standard
IP / NEMA Rating:
1 = IP20 / NEMA 1
Brake Transistor:
B = Brake
Cooling:
A = Air
Customer Code:
00 = 50 Hz
01 = 60 Hz
Documentation:
0 - Supplied separately
1 - English
2 - French
3 - Italian
4 - German
5 - Spanish
11