Emerson Unidrive M700 Installation Manual page 25

3.4.3 Through-panel mounting
The drive can be through-panel mounted using the appropriate brackets, see section 3.8 Enclosing
standard drive for high environmental protection on page 32 for further details.
The through-panel mounting kit is not supplied with the drive and can be purchased separately,
below are the relevant part numbers:
Size
If the drive has been used at high load levels for a period of time, the heatsink can reach
temperatures in excess of 70 °C (158 °F). Human contact with the heatsink should be
prevented.
WARNING
Figure 3-10 Through-panel mounting dimensions
97 mm (3.82 in)
73 mm (2.87 in)
36.5 mm
(1.44 in)
48.5 mm
(1.91 in)
3
38 mm
(1.50 in)
76 mm (2.99 in)
Unidrive M/HS Frame 3 and 4 Power Installation Guide
Issue Number: 3
3
4
Æ5.20 mm (0.21 in)
x 8 holes
36.5 mm
(1.44 in)
15 mm
(0.59 in)
48.5 mm
(1.91 in)
Radius 1.0 mm (0.04 in)
38 mm
(1.50 in)
CT part number
3470-0053
3470-0056
106 mm (4.17 in)
68.5 mm
(2.70 in)
4
4
Radius 1.0 mm
(0.04 in)
58.5 mm
(2.30 in)
117 mm (4.61 in)
68.5 mm
(2.70 in)
58.5 mm
(2.30 in)
25