Emerson Unidrive M700 Installation Manual page 7

Person authorised to complete the technical file:
C Hargis
Chief Engineer
Newtown, Powys, UK
IMPORTANT NOTICE
These electronic drive products are intended to be used with appropriate motors, controllers, electrical
protection components and other equipment to form complete end products or systems. It is the
responsibility of the installer to ensure that the design of the complete machine, including its safety-related
control system, is carried out in accordance with the requirements of the Machinery Directive and any
other relevant legislation. The use of a safety-related drive in itself does not ensure the safety of the
machine.
Compliance with safety and EMC regulations depends upon installing and configuring drives correctly,
including using the specified input filters. The drive must be installed only by professional installers who
are familiar with requirements for safety and EMC. The assembler is responsible for ensuring that the end
product or system complies with all relevant laws in the country where it is to be used. For more
information regarding Safe Torque Off, refer to the Control User Guide.
Unidrive M/HS Frame 3 and 4 Power Installation Guide
Issue Number: 3
G Williams
Vice President, Technology
Date: 30th November 2015
7