Setting The Time; Setting The Time Offset - Avaya 9504 User Manual

20.4 Setting the Time

The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the option for checking the
instead.
·
Time Display Format
The time format (12 or 24-hour) is controlled by the telephone system. It can be set to either 12-hour or 24-hour
format for all phones by the system administrator.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight System Administration.
!
·
Note: This option is only present if you have been configured as a system phone user by your system
administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down cursor keys to highlight Time. Press Select.
6. The current time being used by the telephone system is displayed.
7. Enter the required time in 24-hour clock format:
·
Use either the * or # keys to enter the : separator.
·
To delete the previous digit or character entered press Bksp.
8. When a complete and valid time has been entered, the display will request confirmation by showing the Set soft
key option.
9. To set the time as the new time to be used by the telephone system press the Set soft key.

20.5 Setting the Time Offset

The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the option for checking the
instead.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight System Administration.
!
·
Note: This option is only present if you have been configured as a system phone user by your system
administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down cursor keys to highlight Local Time Offset. Press Select.
6. The current offset is displayed.
7. Enter the offset required in hours and minutes:
·
To enter the : separator press either the * or # key.
·
To delete the previous digit or character entered press the Bksp key.
·
To change the offset from between positive or negative press the right cursor key.
8. When a valid offset has been entered, the Set soft key is displayed.
9. To apply the offset to the current telephone system time press the Set soft key.
9500 Series Telephone User Guide
IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
System Administration: Checking the Time Server Status
Time Server Status
PHONE key and then press the
Time Server Status
PHONE key and then press the
Issue 12b (Wednesday, March 28, 2018)
146
is available
146
is available
Page 147