Casio CT-X5000 User Manual page 94

Table of Contents

Advertisement

To record a new solo track
1.
Specify the tempo to use at the start of
recording.
• See "Changing Auto Accompaniment Speed (Tempo)"
(page EN-46).
2.
Select the tone you want to use at the start of
recording.
• See "Selecting a Tone" (page EN-18).
• You cannot use layer or split when recording.
• If you want to change mixer settings of solo track being
recorded, perform the procedure under "To configure
mixer settings" (page EN-64). Configure the mixer
settings of the UPPER 1 part of the KEYBOARD part
group.
• For details about data recorded to the solo track, see
"Recording Track and Recorded Data" (page EN-90).
3.
Press 8 RECORD/STOP.
This enters recording standby.
• The [SONG] and [SYSTEM] indicators are also
displayed at this time, and mixer part indicators
all start to flash. This indicates that the system
track is the recording target.
Flashing
Displayed
4.
Select the solo track to which you want to
record.
(1) Long-press 8 RECORD/STOP.
• This displays the recording setting screen that you
can use to select the recording target track.
• "RecTrkSy" indicates that the current recording
target track is the system track.
(2) Use bn [–] and [+], or the bl dial to display the
[SONG] and [SOLO] indicators, and select the solo
track to which you want to record.
• "RecTrk" indicates that the current recording target
track is a solo track, and the number is the track
number.
• At this time, the corresponding mixer part number
(
to
to
(3) Press 8 RECORD/STOP to return to recording
standby.
• To insert a rest at the beginning of the recording,
press ck START/STOP in place of
8 RECORD/STOP. This starts recording and
inserts rests until you play something on the
keyboard.
5.
Playing on the keyboard automatically starts
recording.
6.
When you are finished recording, press
8 RECORD/STOP.
This causes the [RECORD] indicator to disappear.
• Pressing ck PLAY/STOP will play back the recorded
data.
Using the MIDI Recorder to Record
R e c T r k S y
Displayed
R e c T r k 1
) also flashes.
Displayed
EN-93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct-x3000

Table of Contents