Casio CT-X5000 User Manual page 62

Table of Contents

Advertisement

To quantize a phrase
1.
Use the procedure under "To enter the Phrase
Editing mode" (page EN-59) to enter the Phrase
Editing mode.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Quantize", and then press [6]
(ENTER).
This displays "Phrase" and causes the [P1] indicator to
flash on the display.
3.
Use bn [–] and [+] or the bl dial to select the
number of the phrase you want to quantize,
and then press [6] (ENTER).
This displays "Value".
4.
Use bn [–] and [+] or the bl dial to select the
note value to be used as the quantize reference
note.
Display
4, 8, 16, 32
Quarter note, eighth note, sixteenth note,
thirty-second note
4d, 8d, 16d, 32d Dotted notes
4t, 8t, 16t, 32t
Triplet notes
5.
Press [6] (ENTER).
This displays "Sure?"
6.
Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message "Wait..."
(operation in progress). Do not perform any operation
while this message is displayed. "Complete" is
displayed after the operation is complete.
7.
To exit the operation, long-press the [4] (EXIT)
bm number key.
Description
To key shift a phrase
1.
Use the procedure under "To enter the Phrase
Editing mode" (page EN-59) to enter the Phrase
Editing mode.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "KeyShift", and then press [6]
(ENTER).
This displays "Phrase" and causes the [P1] indicator to
flash on the display.
3.
Use bn [–] and [+] or the bl dial to select the
number of the phrase you want to key shift,
and then press [6] (ENTER).
This displays "Value".
4.
Use bn [–] and [+] or the bl dial to specify the
key shift setting value.
• You can specify a value in the range of –24 to 24.
Lowering the setting value by one lowers the pitch by
one semitone, while raising the value raises the pitch.
5.
Press [6] (ENTER).
This displays "Sure?"
6.
Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message "Wait..."
(operation in progress). Do not perform any operation
while this message is displayed. "Complete" is
displayed after the operation is complete.
7.
To exit the operation, long-press the [4] (EXIT)
bm number key.
Using Phrase Pads
EN-61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct-x3000

Table of Contents