Casio CT-X5000 User Manual page 52

● Chord Point
The illustration below shows a keyboard with a chord point
specified. The LOWER part keyboard range is not affected in
this case.
Chord Point
Accompaniment
keyboard
LOWER part keyboard
• While the Chord Input Priority Mode (page EN-52) is turned
on, the LOWER part tone does not sound in the area where
the LOWER part keyboard and accompaniment keyboard
overlap.
To specify the lower point
1.
Hold down dp SPLIT until "Split Pt" is
displayed.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Lower Pt".
3.
Use bn [–] and [+] or the bl dial to specify the
note name of the lower point note (the lower
limit of the UPPER part keyboard).
Lower point note number
B 3 I C 4
• You can also specify the lower point by holding down
dp SPLIT and pressing the keyboard key where you
want the lower point to be.
• You cannot specify a lower point that is lower than (to
the left of) the chord point. If you do, the chord point
will be forced to be the same key as the lower point.
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
UPPER part keyboard
Lower point note name
Using Auto Accompaniment (Rhythm Mode)
To specify the chord point
1.
Hold down dp SPLIT until "Split Pt" is
displayed.
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Chord Pt".
3.
Use bn [–] and [+] or the bl dial to specify the
note name of the chord point (page EN-51).
Chord point note number
B 3 I C 4
• You can also specify the chord point by holding down
dp SPLIT and pressing the keyboard key where you
want the chord point to be.
• You cannot specify a chord point that is higher than (to
the right of) the chord point. If you do, the lower point
will be forced to be the same key as the chord point.
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
Chord point note name
EN-51