Registering And Restoring A Setup (Registration; Registering A Setup - Casio CT-X5000 User Manual

Registering and Restoring a Setup (Registration)

Registering a Setup

Registration Setting Items
Setting items that can be registered are shown below.
● Keyboard Play
• Tone number (UPPER 1, LOWER 1, UPPER 2, LOWER 2
parts)
• Layer (on/off)
• Split (on/off)
• Reverb, Chorus, Delay (on/off, type)
● Note Control
• Transpose
• Octave Shift (UPPER 1, LOWER 1, UPPER 2, LOWER 2
parts)
• Touch Response setting status
• Pedal 1 and Pedal 2 effects (Pedal 2 type is not recorded)
• Scale, scale fine tune, part fine tune, part coarse tune
• dn SUSTAIN button (on/off, setting mode)
• dm PORTAMENTO button (on/off, setting mode)
• CT-X5000: dt MODULATION/ASSIGNABLE button (on/
off, setting mode)
● Split Settings
• Split Point
• Lower Point
• Chord Point
• Chord Input Priority Mode
● Auto Accompaniment
• Rhythm Number
• ACCOMP on/off ([ACCOMP] indicator displayed/not
displayed status)
• Tempo, Note value display setting
• Chord Fingering Mode
• Synchro start
• Auto Accompaniment volume
● AUTO HARMONIZE/ARPEGGIATOR
• do AUTO HARMONIZE/ARPEGGIATOR button
assignment
• Auto Harmonize (on/off, type)
• Arpeggiator (on/off, type)
• Arpeggiator Hold (on/off)
● Phrase Pad
• Phrase set number
• Phrase playback setups
● Mixer
• Part on/off setting
• Volume, Pan, Reverb send, Chorus send, Delay send
settings
EN-68
To register a setup
• Specifying a bank and area that already has data stored
to it in the procedure below causes the recorded data
to be deleted. For information about banks and areas,
see "Setup Storage Locations" (page EN-67).
1.
Set up the Digital Keyboard with the tone,
rhythm and other settings to suit the song you
will play.
2.
Select the bank where you want to store the
registration.
(1) Press co BANK.
• "Bank" will appear on the display along with the
currently selected bank number.
(2) While "Bank" and the bank number are displayed,
use bn [–] and [+] or the bl dial to select a bank
number.
• While "Bank" and the bank number are displayed,
each press of co BANK cycles through the bank
numbers.
3.
While holding down cp STORE, press one of
the cs REGISTRATION buttons ([1] to [8]) to
select the area you want to specify as the
registration destination.
Pressing the two buttons registers the current Digital
Keyboard setup to the bank and area you specified in
steps 2 and 3.
Bank number
Bank number
Area number