Casio CT-X5000 User Manual page 107

Using the MIDI Recorder to Record
Event Setting Ranges
The ranges of the event settings are shown in the table below.
Event Parameter (Display)
Notes Note Number (C1 to G9)
Velocity (Velocity)
Gate Time Beat (GateBeat)
Gate Time Tick (GateTick)
Tone Tone Number (Tone)
Number
Rhythm Rhythm Number (Rhythm)
Number
Chord Chord type or "NonChord"*
*1 CT-X5000: 1 to 393, CT-X3000: 1 to 343
*2 See "Auto Accompaniment Chord Event" (page EN-105).
*3 All chord types that can be fingered on the accompaniment
keyboard or "NonChord". See "Fingering Guide" (page
A-2).
To edit an event
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "TrkEvent", and then press [6]
(ENTER).
This displays "Trk Sy"
3.
Use bn [–] and [+] or the bl dial to specify the
event edit target track, and then press [6]
(ENTER).
This displays the [EVENT] indicator to the left of the
[EDIT] indicator.
Displayed
• This displays the event at the beginning of the track.
EN-106
Settings
0 to 127
1 to 127
0 to 340
0 to 95
1 to 900
1
*
2 3
*
4.
Use the [2] (w) and [5] (q) bm number keys to
display the event whose parameters you want
to change.
• Event location information (measure, beat, tick) is
shown on the right side of the display.
Measure
• Displaying a note event causes a confirmation tone
(the note of the note event) to sound.
• While editing the system track, one of the indicators
below will be displayed. The displayed indicator
indicates the part where the displayed event is
recorded.
Part
UPPER 1
UPPER 2
LOWER 1
LOWER 2
Auto Harmonize
Phrase Pad 1 to 4
5.
Depending on the event you are editing,
perform one of the procedures below.
• For information about event status indicators and how
to interpret indicators, see "Event Display" (page
EN-105).
• Pressing ck PLAY/STOP while editing an event will
play back the recorded data from the beginning of the
measure that includes the displayed event.
Y Note Events
(1) Use the [2] (w) and [5] (q) bm number keys to
display a note event.
(2) Use the [1] (V) and [3] (W) keys to display the
parameter you want to change.
(3) Use bn [–] and [+] or the bl dial to change the
setting value of the displayed parameter.
• You can also use the keyboard to specify note
numbers.
• The gate time beat (GateBeat) can be specified in
the range of 0 to 340 for a song with a time
signature from 2/4 to 8/4, and in the range of 0 to
680 for a song with a time signature from 2/8 to
16/8.
• The gate time tick (GateTick) can be specified in
the range of 0 to 95 for a song with a time
signature from 2/4 to 8/4, and in the range of 0 to
47 for a song with a time signature from 2/8 to
16/8.
(4) Repeat steps (2) and (3) for each of the parameters
you want to change.
• While a note event is displayed, you can use the [2] (w)
and [5] (q) bm number keys to scroll between events. If
the event you scroll to is a note event, the same parameter
remains displayed.
Beat
Tick
Display
to