Casio CT-X5000 User Manual page 29

Playing on the Keyboard
2.
To turn the arpeggiator off, press do AUTO
HARMONIZE/ARPEGGIATOR.
This causes the [ARPEGGIATOR] indicator to disappear.
• If the [AUTO HARMONIZE] indicator is displayed
instead of the [ARPEGGIATOR] in step 1 of the above
procedure, you will need to change the function
assigned to the button.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-112)
and select "2 Arpeg." for the following setting: Auto
Harmonize/Arpeggiator (AHar/Arp) 3 AUTO
HARMONIZE/ARPEGGIATOR button assignment
(BtnAsign) (page EN-114).
• Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard
keys.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-112)
and enable the following setting: Auto Harmonize/
Arpeggiator (AHar/Arp) 3 Arpeggiator Hold (ArpegHld)
(page EN-114).
• While you are using split (page EN-19), you can use the
UPPER 1 part or LOWER 1 part to sound the arpeggiator.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-112)
and change the following setting: Auto Harmonize/
Arpeggiator (AHar/Arp) 3 Arpeggiator Part (ArpegPart)
(page EN-114).
EN-28
To select an arpeggiator type
1.
Perform the procedure under "To turn on the
arpeggiator" and confirm that the
[ARPEGGIATOR] indicator is displayed.
2.
Long-press do AUTO HARMONIZE/
ARPEGGIATOR until the [FUNCTION] indicator
flashes on the display.
This displays the currently selected arpeggiator type
number and name.
3.
Use bn [–] and [+] or the bl dial to display the
arpeggiator type you want to select.
• While the arpeggiator type is displayed, long-pressing
do AUTO HARMONIZE/ARPEGGIATOR will select
the tone that is recommended for the displayed type.
• For details about arpeggiator types, refer to the
separate "Appendix".
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.