Table of Contents
Advertisement
To configure phrase mixer settings
1.
Use the procedure under "To enter the Phrase
Editing mode" (page EN-59) to enter the Phrase
Editing mode.
2.
Long-press 9 PART (MIXER) until the
[MIXER] indicator appears.
This displays the [KEYBOARD] indicator and
part indicator.
• Mixer part indicators
phrase numbers 1 through 4.
3.
Use the [1] (V) and [3] (W) bm number keys
to select the phrase whose mixer settings you
want to configure.
4.
Use the [2] (w) and [5] (q) bm number keys to
display the menu item you want to change.
• Initial default setting values are indicated by an
asterisk (*).
Item Name
Description
(Display)
Tone (Tone)
Changes the phrase
tone.
Volume
Adjusts the phrase
(Volume)
volume level.
Pan (Pan)
Adjusts the stereo
position of the phrase. 0
indicates the center,
while a smaller value
shifts to the left and a
larger value shifts to the
right.
Reverb Send
Specifies how much
(Rev Send)
reverb is applied to the
selected part.
Chorus Send
Specifies how much
(Cho Send)
chorus is applied to the
selected part.
Delay Send
Specifies how much
(Dly Send)
delay is applied to the
selected part.
5.
Use bn [–] and [+] or the bl dial to change the
setting value.
6.
To exit the operation, long-press the [4] (EXIT)
bm number key.
EN-62
mixer
through
correspond to
Settings
0 to 900
0 to 100* to 127
–64 to 0* to 63
0 to 40* to 127
0* to 127
0* to 127
Muting Specific Parts (Part
Mode)
Your Digital Keyboard produces Auto Accompaniment and
keyboard play notes using multiple parts. You can use the
part on/off function to easily mute and unmute one or more
parts. For example, you can mute all parts except for the
drum, percussion, and bass parts of the Auto
Accompaniment.
Turning a Part On or Off
The example below shows how to turn each Auto
Accompaniment part on or off. If you perform this operation
while an Auto Accompaniment is sounding, you can compare
what the accompaniment sounds like with and without the
part.
To turn each part on or off
1.
Press 9 PART.
This causes the indicator lamp to the left of the button to
light (Part Mode).
This displays the name of the currently selected part
group.
K e
• For details about part groups, see "Part On/Off
Function Part Groups" (page EN-63).
Lit
b o a r d
y
Advertisement
Table of Contents
