Casio CT-X5000 User Manual page 35

Controlling Sounds
4.
Use bn [–] and [+] to select the
dt MODULATION/ASSIGNABLE operation.
To select this operation:
Enable the function assigned to the
button only while the button is pressed.
Toggle the function between enabled
and disabled each time the button is
pressed.
• The indicator lamp to the left of the button is lit when
the assigned function is enabled, and unlit when it is
disabled.
5.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
To change the function assigned to
dt MODULATION/ASSIGNABLE
1.
Perform steps 1, 2, and 3 under "To change the
operation performed when dt MODULATION/
ASSIGNABLE is pressed" (page EN-33).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Btn Func".
3.
Use bn [–] and [+] to change the function
assigned to dt MODULATION/ASSIGNABLE.
To change to this function:
Vibrato
Change how DSP effects are applied to
tones in accordance with user settings.*
* For information about the setting operation see "To change
how DSP effects applied when dt MODULATION/
ASSIGNABLE is pressed" (page EN-34).
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
EN-34
Select this
setting value:
1 Moment
2 Toggle
Select this
setting value:
1 Mod
2 DSP
To specify the keyboard part to which an
effect is applied when dt MODULATION/
ASSIGNABLE is pressed
1.
Perform steps 1, 2, and 3 under "To change the
operation performed when dt MODULATION/
ASSIGNABLE is pressed" (page EN-33).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "PartEnbl", and then press [6]
(ENTER).
3.
Use the [1] (V) and [3] (W) keys to display
the part whose setting you want to change.
4.
Use the bn [–] and [+] to switch between on
and off.
• The effect is applied to parts that are turned on, and
not applied to parts that are turned off.
5.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
• For details about keyboard parts, see "Sounding Multiple
Tones (Layer and Split)" (page EN-19).
To change how DSP effects applied when
dt MODULATION/ASSIGNABLE is pressed
• The DSP module registered with the procedure below are
elements of this Digital Keyboard's DSP effect. For details
about DSP effect configuration and parameters, see "DSP
Editing" (page EN-72).
1.
Perform steps 1, 2, and 3 under "To change the
operation performed when dt MODULATION/
ASSIGNABLE is pressed" (page EN-33).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Btn Func".
3.
Use bn [–] and [+] to change the setting to
"2 DSP".
4.
Use the [1] (V) and [3] (W) keys to display
"DSPModle" (the target DSP module).
This displays a DSP module name.
Module number
M o n 1 B EQ
DSP module name