Casio CT-X5000 User Manual page 80

To edit an existing rhythm and save it
• When editing the accompaniment pattern of an existing
rhythm, you can perform new recording operations for each
of the following parts: Variations 1 through 4 and Fill-ins 1
through 4. In the case of intro and ending, you need to first
clear all parts and then record new parts.
• You can copy the accompaniment pattern of an existing
rhythm to a user area and then edit (add and delete) notes
recorded in each part. You can copy an entire
accompaniment pattern (step 3 below) or copy a particular
part only (step 5 below). Refer to each of these procedures
as required.
1.
Select the built-in rhythm or previously-saved
user rhythm you want to edit.
• See "Selecting a Rhythm" (page EN-43).
2.
Long-press bk FUNCTION until the [EDIT]
indicator appears.
• This enters the Rhythm Editing Mode and displays the
rhythm editing screen.
• This causes the
indicates that Variation 1 of the accompaniment
pattern is selected for editing.
• "Drum" is displayed for the part to be edited.
3.
Select the accompaniment pattern to be edited.
To select this:
Intro
Ending
Variation 1 to 4,
Fill-in 1 to 4
* Each press of the button toggles between Variation and Fill-
in.
• The indicator for the currently selected
accompaniment pattern (page EN-47) will flash.
• At this point, you could copy an existing
accompaniment pattern to a user area. See "To copy
an existing accompaniment pattern for editing" (page
EN-83).
Displayed
indicator to flash. This
Press this button:
bo INTRO
bt ENDING/SYNCHRO START
bp VARIATION/FILL-IN 1 to
bs VARIATION/FILL-IN 4*
Creating an Auto Accompaniment (User Rhythm)
4.
Depending on the accompaniment pattern you
selected, perform one of the operations below.
Y If you selected Variation 1 to 4 or Fill-in 1 to 4
Advance directly to step 5.
Y If you selected Intro or Ending
Clear all the parts of the accompaniment pattern.
(1) Perform steps 2 through 4 under "To batch clear the
recorded data in all parts included in a single
accompaniment pattern" (page EN-85).
(2) Press cs REGISTRATION [8] (EDIT MENU).
(3) Use the [1] (V) and [3] (W) bm number keys to
display "Element", and then press [6] (ENTER).
(4) Use the [1] (V) and [3] (W) bm number keys to
display "Measure", and then use bn [–] and [+], or
the bl dial to change the setting value.
Accompaniment Pattern
Intro, Ending
Variation
Fill-in
(5) Use the [1] (V) and [3] (W) keys to display "Beat"
(time signature), and then use bn [–] and [+], or the
bl dial to change the setting value (Setting Ranges:
2/4 to 8/4, 2/8 to 16/8).
(6) Press the [4] (EXIT) bm number key.
5.
Select the part to be edited
(1) Press 9 PART and confirm that the lamp to the left
of the button is lit.
(2) Use the bm number keys [1] through [8] to select the
part to be edited.
To select this part:
Percussion
Drums
Bass
Chord 1 to Chord 5
• This displays the mixer part indicator that
corresponds to the selected part to flash.
(3) Press 9 PART and confirm that the lamp to the left
of the button is unlit.
• At this point, you could copy a part in an existing
rhythm to a user area (except when the
accompaniment pattern is an intro or ending). See
"To copy an existing rhythm part for editing" (page
EN-84).
Settings
01 to 16
01 to 16
01 to 02
Press this number key:
[1]
[2]
[3]
[4] to [8]
EN-79