Casio CT-X5000 User Manual page 128

Symptom
Some notes are cut off while they are playing.
The volume or tone setting I made has changed.
Output volume does not change even though I
change my keyboard touch.
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
With some tones, octaves do not change at the far
ends of the keyboard.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
The reverb of notes seems to change suddenly.
Operation
Tone, rhythm, and other settings revert to their initial
defaults whenever you turn on the Digital Keyboard.
Computer Connection
I can't exchange data between the Digital Keyboard
and a computer.
Action
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 64 (32 for some tones).
This does not indicate malfunction.
• Adjust the volume setting (page EN-11) and the equalizer setting
(page EN-25).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-9).
• CT-X3000: Replace the batteries with new ones (page EN-9) or
switch over to AC adaptor power (page EN-8).
• Change the Touch Response setting (page EN-29).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-9).
This is due to system limitations. It does not indicate malfunction.
This is due to system limitations. It does not indicate malfunction.
• Check and adjust the transpose (page EN-35), tuning (page
EN-37), part coarse tuning and part fine tuning settings (page
EN-37).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-9).
• Check and adjust the reverb and delay settings (page EN-22).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-9).
Though Digital Keyboard settings reset when you turn off the Digital
Keyboard (page EN-9), you can save setups to registration memory
for instant recall whenever you need them (page EN-67). If Auto
Resume function (page EN-10) is turned on, most settings are saved
while power is turned off.
• Check to make sure that the USB cable is connected to the Digital
Keyboard and computer, and that the device is selected correctly
with your computer's music software settings (page EN-124).
• Turn off the Digital Keyboard and then exit the music software on
your computer. Next, turn the Digital Keyboard back on and then
restart the music software on your computer.
Reference
EN-127