Casio CT-X5000 User Manual page 136

Module Name
Display Parameter Data

Tremolo
Rate LFO Rate
Depth LFO Depth
Waveform LFO Waveform
WetLevel Wet Level
DryLevel Dry Level

Auto Pan
Rate LFO Rate
Depth LFO Depth
Waveform LFO Waveform
Manual Manual
WetLevel Wet Level
DryLevel Dry Level

Compressor
Attack Attack
Release Release
Ratio Ratio
WetLevel Wet Level
DryLevel Dry Level
Shifts the volume of the input signal using an LFO.
Adjusts the LFO rate.
Adjusts the LFO depth.
Selects the LFO waveform.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Shifts the continual left-right panning of the input signal using an LFO.
Adjusts the LFO rate.
Adjusts the LFO depth.
Selects the LFO waveform.
Adjusts the pan (stereo position). –64 is full left, 0 is center, and
+63 is full right.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Compresses the input signal, which can have the effect of suppressing level variation.
Adjusts the time until compression goes into effect. A smaller
value causes prompt compressor operation, which suppresses
the attack of the input signal. A larger values delays compressor
operation, which causes the attack of the input signal to be
output as-is.
Adjusts the time until compression is released after the input
signal drops below a prescribed level. When an attack feeling is
desired (no compression at the onset of the sound), set this
parameter to as low a value as possible. To have compression
applied at all times, set a high value.
Adjusts the compression ratio of the audio signal.
Adjusts the level of the effect sound. Output volume changes in
accordance with the Ratio setting and the characteristics of the
input tone.
Adjusts the level of the direct sound.
Description
Reference
Settings
000 to 127
000 to 127
Sine, Triangle,
Trapzoid
000 to 127
000 to 127
000 to 127
000 to 127
Sine, Triangle,
Trapzoid
–64 to 00 to 63
000 to 127
000 to 127
000 to 127
000 to 127
1:1, 2:1, 4:1, 8:1,
16:1, 32:1, Inf:1
000 to 127
000 to 127
EN-135