Connecting User System Interface Cable To Cable Body Connector - Renesas H8S/2168 User Manual

2.1.1

Connecting User System Interface Cable to Cable Body Connector

After making sure the direction of the cable body connector is correct, firmly insert the cable body
connector into the emulator station socket, and fasten the emulator station with two CTS screws
×
(M3 6 mm) (figure 2).
Emulator station
Cable body connector
CTS screws (M3 x 6 mm)
User system interface cable
Figure 2 Connecting User System Interface Cable to Emulator Station (1)
4