Fasten the user system interface cable head to the IC socket for a TFP-144 package on the user
system with the four screws (M2.0
time, alternating between screws on opposing corners. Take special care, such as manually securing
the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
Pin 1
Figure 5 Connecting User System Interface Cable to User System
10
×
10 mm) provided. Each screw should be tightened a little at a
User system
Screws (M2.0 x 10 mm)
Pin 1
Cable head
IC socket
(NQPACK144SE
manufactured by
Tokyo Eletech Corporation)