Fasten the user system interface cable head to the IC socket for an FP-80A package on the user
system with the four screws (M2.0
a time, alternating between screws on opposing corners. Take special care, such as manually
securing the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
Figure 3 Connecting User System Interface Cable to User System
x
12 mm) provided. Each screw should be tightened a little at
Screws (M2 x 12 mm)
with flat washers
IC socket
(IC149-080-017-B5
manufactured by
YAMAICHI ELECTRONICS Co., Ltd.)
User system
Cable head
Pin 1
7