Description; Specifications - Thermo Scientific NESLAB EX Series Installation, Operation And Maintanance Manual

Description

Specifications

Process Fluid
Temperature Range 2
Temperature Stability 3
4
Pump Capacity
Heater (Watts)
115V/60 Hz Models
230V/50 Hz Models
100V/50-60Hz Models
5
Bath Work Area
(W x L x D)
Inches
Centimeters
Bath Volume
Gallons
Liters
6
Weight
Pounds
Kilograms
The Thermo Scientific NESLAB EX Bath/Circulators are designed to provide
temperature control for applications requiring a fluid work area or pumping to an
external system.
Units consist of a circulation pump, seamless stainless steel bath, work area
cover, and a microprocessor temperature controller.
EX 7
Meters Feet
4.9 16
3.7 12
2.4 8
1.2 4
800
2000
800
6 5 / x 7 x 6 8 ¾ x 8
8
16.8 x 17.8 x 15.2 22.4 x 20.6 x 15.2
1.9
7.2
27
12.2
1. Specifications subject to change.
2. Above 80°C, baths are tested with silicone oil. This fluid is known to release a formalde-
hyde vapor (which is carcinogenic) above 150°C.
3. 37°C, 45°C, 60°C bath temperature. 20°C ambient. Measured at the center of the work area,
stable ambient. Sea level. For 37°C the work area cover was off, for 45°C and 60°C the work
area cover was on. No external flow. For some applications, agitation and stability above
ambient may be improved by connecting a small length of hose between the pump connections
on the rear of the unit.
4. 20°C ambient. 20°C bath temperature using water. Pump fully loaded. Sea level.
5. See next page for additional dimensions.
6. Add approximately 3 pounds (1.4 kilograms) for shipping weight.
- 7 -
EX 10 EX 17
Ambient +12°C to +200°C
±0.01°C
0.8 1.6 2.4 3.2
3 6 9 12
Flow
1 / x 6 8¾ x 8 1
8
22.4 x 20.6 x 22.9
4.8
3.0
11.3 18.1
32
36
14.5 16.3
EX 35
4.0 Gpm
15 Lpm
1600
2000
1200
/ x 9 8 ¾ x 15 ½ x 12
8
22.4 x 39.4 x 30.5
9.6
36.3
53
24.0