Polycom VVX600 Administrator's Manual page 13

Table 2: Configuring USB Headset Behavior
Central Provisioning Server
Specify how phone and the Bluetooth headset interact ..................... site.cfg >
Specify if the Bluetooth headset volume persist between calls ................. site.cfg >
To enable or disable the Bluetooth headset feature .............................. features.cfg >
To turn the Bluetooth radio (transmitter/receiver) on or off .............................. features.cfg >
Note: Sound Effects Mixed with Active Audio
On the VVX 600, there are two cases where sound effects are mixed with the active audio
termination instead of being routed to the location designated by se.destination:
•
When se.destination=headset and there is active audio on the handset, then
sound effects are mixed with the active audio on the handset.
• When se.destination=handset and there is active audio on the headset, then
sound effects shall be mixed with the active audio on the headset.
This audio mixing occurs due to a phone hardware limitation.
Odd: Chapter Title
template > parameter
up.headset.phoneVolumeControl
voice.volume.persist.headset
feature.bluetooth.enabled
bluetooth.radioOn
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
5