User Preferences <Up; Voice <Voice - Polycom VVX600 Administrator's Manual

User Preferences <up/>
These parameters provide user preferences for certain aspects of the phones. The VVX 600 phone
introduces new user preference parameters.
Table 5: User Preferences Parameters
Parameter
up.headset.phoneVolumeControl
Controls the phone's behavior when you adjust volume at the headset.
enable – The phone responds to volume up/down events from the headset by displaying the volume
widget in the phone's user interface and adjusting the phone's internal volume.
disable – The phone will ignore volume up/down events from the headset; pressing the headset's
volume controls has no effect on the phone.
auto – The phone will automatically select which of the above two behaviors to apply, based upon the
headset type and model that is attached.
1
Changes cause the phone to restart or reboot.
Voice <voice/>
The <voice/> parameter controls the settings related to the audio on the phone. This configuration
parameter is defined as follows:
Table 6: Voice Parameters
Parameter
voice.volume.persist.headset
If 0, the headset receive volume will automatically revert to a certain level after each call. If 1, the volume for
each call will be the same as the previous call.
1
Changes cause the phone to restart or reboot.
8
Permitted Values
1
disable, enable, auto
Permitted Values
1
0 or 1
Default
auto
Default
0
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl