Using The Polycom Web Configuration Utility - Polycom VVX600 Administrator's Manual

Using the Polycom Web Configuration
Utility
After you set up your VVX 600 phones on the network, users will be able to place and answer calls using
the default configuration. The Web Configuration Utility enables you and your phone users to optimize
or customize individual phones.
You and your users can perform configuration changes on a per-phone basis with the Web Configuration
Utility. You can use the Web Configuration Utility as the sole configuration method or in addition to
central provisioning. Any configuration changes made to individual phones using the Web Configuration
Utility will override configuration settings made with central provisioning. Configuration changes made
manually using a phone's user interface will override changes made using the Web Configuration Utility.
You can access the utility by entering the phone's IP address in a Web browser, such as
http://123.456.789.012. For administrators, log in as an Admin and enter the administrative password,
which is 456 by default.
Troubleshooting: I Can't Enable Certain Features Using the Web Configuration Utility
You can't enable or disable all features through the Web Configuration Utility. You must make
changes for these features through the configuration files.
Changes made through the Web Configuration Utility or the phone's user interface are stored internally
as overrides. These overrides take precedence over settings contained in the configuration obtained
from the provisioning server.
If the provisioning server permits uploads, these override settings will be saved in a file called <MAC
Address>-web.cfg and <MAC Address>-phone.cfg on the provisioning server as well as in the phone's
device settings.
Caution: Web Configuration Changes Override Provisioning Server Configurations
Web configuration changes will continue to override the provisioning server-derived configuration
until you delete them by selecting Reset Web Configuration in the utility, or you configure
<device/>
interface—will continue to override the provisioning server-derived configuration until you delete
them by selecting Reset Local Configuration from the phone's menu, or configure
parameters. For instructions on how to reset web and local configurations and more information
on <device/> parameters, see the latest Polycom UC Software Administrators' Guide.
parameters. Local configuration changes—made through the phone's user
<device/>
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
9