Setting The Character Code For File Names; Character Code - Yamaha TransAcoustic TA2 Owner's Manual

Setting the Character Code for file names

If the Song cannot be called up, you may need to select the appropriate Character Code which is compatible
with the file/folder name from the following two settings.
Setting range Int (International)
JA (Japanese)
Default setting Int
 To set to International
While holding down Button 2, turn on the power by pressing the [P] (Standby/On) switch.
International is selected, and "Int" appears on the display.
 To set to Japanese
While holding down the Menu button and Button 2, turn on the power by pressing the [P] (Standby/On)
switch.
Japanese is selected, and "JA" appears on the display.
NOTE
The setting here is maintained even when the power is turned off.
For playing back Songs with names using western European
characters (including umlaut or diacritic marks).
For playing back Songs with names using Japanese characters and
alphabets (excluding umlaut or diacritic marks).
59
TA2 Owner's Manual