Yamaha TransAcoustic TA2 Owner's Manual page 50

 Formatting a USB flash drive
Formats or initialize the USB flash drive connected to this instrument. When a "UnF" appear on the display,
indicating that the USB flash drive has not been formatted, format the drive.
NOTICE
Executing the Format operation will delete all data saved in the USB flash drive. Save important data to a computer
or another storage device.
1
Connect the USB flash drive to the USB [TO DEVICE] terminal.
2
Press the Menu button several times
until the [UTILITY] lamp lights up
in orange.
3
Press Button 3 [Func.] to enter the
Function Settings.
4
Rotate the [VOICE/VALUE] control
to select the function number "F7.3."
5
Press Button 3 [Func.] to call up
"For" (Format) in the display.
"n y" will appear subsequently.
NOTE
While "n y" is shown in the display, you can cancel
the Format operation by pressing a button other than
Button 3 [Func.].
6
When "n y" appears, press Button 3
[Func.] to execute the Format
operation.
Dashes appear in succession on the display,
indicating that Formatting is in progress.
When the operation is completed, "End"
appears on the display
NOTICE
While dashes appear in succession on the display, never turn off the power or disconnect the USB flash drive. Doing
so may corrupt the data on the USB flash drive, and the Format operation will not be executed properly.
50
TA2 Owner's Manual
Lights up in orange