Yamaha TransAcoustic TA2 Owner's Manual page 14

10 (Bluetooth) lamp
Lights up when the Bluetooth function is on
(page 57). It lights up in blue when the
instrument is connected with a Bluetooth-
equipped device, and it lights up in white when
no Bluetooth-equipped device is connected
and while in the UTILITY.
11 Display
Indicates various setting values, such as Voice
number, Song number and other parameter
values.
Song number
It also indicates various messages with the
three characters (page 60).
12
[VOICE/VALUE] control
Rotating this allows you to select desired Voices
or adjust the setting values. Depending on
particular functions, you may need to press this
to control the function.
13
[VOLUME] control
For adjusting the volume of the entire sound
when in the TransAcoustic mode/Layer mode,
and the output sound via the [PHONES] jack,
AUX OUT jacks, USB [TO HOST] terminal or
Bluetooth.
(Only grand pianos) Pressing the control can
turn the acoustic piano sound on/off (page 17).
14
TA2 Owner's Manual
Parameter value
14
AUX OUT [R]/[L/L+R] jacks
For connecting an external audio device and
output the sound of this unit to the device
(page 51).
15
MIDI [IN]/[OUT] terminals
For connecting an external MIDI device
(page 53).
16
[DC IN 16V] jack
(For qualified Yamaha personnel only.) This
connects to the power cord. The plug is already
connected when the instrument is shipped.
17
[SENSOR] jack/ [MD/AMP] jack
(For qualified Yamaha personnel only.) These
connect to the sensor and to the internal unit.
The plugs are already connected when the
instrument is shipped.
18 [AUX IN] jack
For connecting an audio device such as a
portable music player and input the sound to
this unit (page 52).
19
USB [TO HOST] jack
For connecting to a computer or a smart device
(page 54).