Backup Functions; Character Code; F9. (Clp-240)/F8. (Clp-230) Backup Functions; F9.5 (Clp-240)/F8.5 (Clp-230) Character Code - Yamaha Clavinova CLP-230 Owner's Manual

F9. / F8.
(CLP-240) (CLP-230)

Backup Functions

TERMINOLOGY
Backup:
You can back up some settings, such as voice selection and
reverb type, so that they will not be lost when you turn off the
power to the Clavinova.
If the backup function is turned on, the settings at power off are
effective. If the backup function is turned off, the settings in
memory are erased when you turn off the power. In this case,
when you turn on the power to the unit, the default settings (the
initial settings) will be used. (The factory setting default list is
found on page 78.)
However, the backup settings themselves, the contents of
the user song recorder memory, and character code set-
ting are always backed up.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage the Function mode and select
(CLP-240)/ (CLP-230).
2. Press the [+/YES] button to engage the
backup function's sub-mode, then use the
[TEMPO/FUNCTION#
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
F9.1: /F8.1:
(CLP-240) (CLP-230)
F9.2: /F8.2:
(CLP-240) (CLP-230)
F9.3: /F8.3:
(CLP-240) (CLP-230)
F9.4: /F8.4:
(CLP-240) (CLP-230)
Setting range: ON/OFF
Normal setting: Voice: OFF
MIDI – Others: ON
Description of sub-modes
F9.1: /F8.1:
(CLP-240) (CLP-230)
• Voice (Keyboard, Dual, and Split <CLP-240>)
• Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
• Split (CLP-240) (ON/OFF, Voice, and Split Functions
for each voice combination)
, ] buttons to select
Voice
MIDI
Tuning
Others
Voice
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Variation (CLP-240) (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume <
(CLP-230) settings>)
• Song Part Cancel Volume (
<CLP-230> settings)
F9.2: /F8.2:
(CLP-240) (CLP-230)
The MIDI functions (
230> settings)
(expect for the
<CLP-230>)
F9.3: /F8.3:
(CLP-240) (CLP-230)
• Transpose
• Tuning ( settings)
• Scale (including base note) (
F9.4: /F8.4:
(CLP-240) (CLP-230)
• Other functions ( <CLP-240>/
230> settings)
• BRILLIANCE setting
• DDE settings (CLP-240) (ON/OFF, depth)
Factory Preset Recall
All Dual mode, Split mode, reverb, effect, touch sensitiv-
ity, tuning settings, and the settings affected by the
Backup Functions can be restored to their original fac-
tory preset values by holding the C7 key (right-most key
on the keyboard) while turning the
This also erases all user song recorder data, and sets all
backup on/off settings (F9 <CLP-240>/F8 <CLP-230>)
to the normal settings. (The factory setting list is found
on page 78.)
CAUTION
Do not turn off the power of the instrument when "CLr"
appears in the display. Doing so may delete all song data
in the instrument, including external songs (page 40).
F9.5 / F8.5
(CLP-240)

Character Code

If the song cannot be loaded, you may need to change the
character code setting.
Setting range: En (English)/JA (Japanese)
Normal setting: En
Detailed Settings – [FUNCTION]
(CLP-240)/
<CLP-240>/
MIDI
<CLP-240>/ <CLP-
<CLP-240>/
Tuning
settings)
Others
<CLP-
[POWER] switch ON.
(CLP-230)
CLP-240/230 Owner's Manual
55