Yamaha TransAcoustic TA2 Owner's Manual page 13

 Control unit
Front panel
1 2
Bottom panel
14
1 [PHONES] jacks
For connecting a pair of headphones with
stereo mini plug (page 16). Up to two
headphones can be connected.
USB [TO DEVICE] terminal
2
For connecting a USB flash drive or an optional
USB wireless LAN adaptor (page 49).
[Aco.] lamp (only for grand pianos)
3
When the lamp is lit, the acoustic piano sound
is produced (page 17).
4 [TA] lamp
This lamp lights to indicate that the instrument
is in the TransAcoustic mode or Layer mode
and the digital sound is output from the
soundboard (page 18).
5 [P] (Standby/On) switch
For turning the power on or setting to standby
(page 15).
3 4
5 6 7 8
These buttons (and switch) are
pressed upward from the bottom.
15 16
6
7
10 11 12
(only for grand pianos)
9
17 18
Menu button
Each time you press this button, VOICE,
SONG or UTILITY is selected and its lamp
lights up in orange.
• VOICE
For controlling the Voice (page 21).
• SONG
For recording your performance or playing
back preset Songs, recorded Songs, etc.
(page 23).
• UTILITY
For setting various convenient functions, such
as the metronome (page 33).
Button 1, Button 2,
8
Depending on what you selected from VOICE/
SONG/UTILITY by using the Menu button,
different functions are assigned and can be
controlled by pressing each button.
13
19
Button 3
9
13
TA2 Owner's Manual