Yamaha TransAcoustic TA2 Owner's Manual page 56

 Listening to audio data from a smart device through this instrument
(Bluetooth Audio function)
This instrument is equipped with Bluetooth functionality. You can input the sound of the audio data saved in a
Bluetooth-equipped device, such as a smart phone, to this instrument and listen to it through the built-in
speaker of the instrument.
*Bluetooth
Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft.) employing
the 2.4 GHz frequency band. In this manual, "Bluetooth-equipped device" means a device that can transmit the audio data
saved in it to the instrument using the Bluetooth function via wireless communication; for example, smart phone, digital audio
player, etc. For proper operation, the device must be compatible with A2DP (Advanced Audio Distribution Profile).
Before using the Bluetooth function, be sure to read "About Bluetooth communications" on page 9.
Pairing with Bluetooth-equipped devices
If you wish to connect your Bluetooth-equipped device to the instrument via Bluetooth, the device needs to be
paired with the instrument first. Once the Bluetooth-equipped device has been paired with this instrument,
there is no need to perform pairing again.
Pairing
"Pairing" means to register Bluetooth-equipped devices on this instrument, and establish the mutual recognition for wireless
communication between the two.
NOTE
• Only one Bluetooth-equipped device can be connected to this instrument at a time (although up to 8 devices can be paired
to this instrument). When pairing with the 9th Bluetooth-equipped device has succeeded, pairing data for the device with
the oldest connection date will be deleted.
• Paring can also be operated in the Function "F8.6" (page 48).
1
Press the Menu button several times
until the [UTILITY] lamp lights up
in orange.
NOTE
• When the Bluetooth function of this instrument is
set to off (
be established when executing the paring operation. Make sure to set the Bluetooth function to on (page 57), and
then start pairing.
• When no Bluetooth-equipped device is connected, the
selected and turns off when VOICE/SONG is selected.
2
Hold down Button 3 [Func.] for three
seconds.
The instrument will enter into Pairing mode.
At the same time the
flash and a "bt" message will appear on the
display.
NOTE
To cancel the pairing, press Button 3 [Func.] while "bt" is shown in the display.
3
On your Bluetooth-equipped device, set the Bluetooth function to on and select
"YAMAHA_SH2_TA2" from the connection list.
For details, refer to the Bluetooth-equipped device owner's manual.
After pairing is completed, the
disappear.
NOTE
• Make sure to complete the settings on the Bluetooth-equipped device within 5 minutes. After 5 minutes elapses, the
Pairing mode ends automatically and the
• If you are required to enter a passkey, enter the numerals "0000."
56
TA2 Owner's Manual
Bluetooth lamp is off), paring cannot
(Bluetooth) lamp will
(Bluetooth) lamp will light up in blue and the "bt" message will
Lights up in orange
(Bluetooth) lamp lights up in white when UTILITY is
Hold down for three seconds.
(Bluetooth) lamp turns off.