Table of Contents
Advertisement
Copying User Songs
Copies the User Songs saved in the internal memory to the connected USB flash drive. For details, refer to
"Copying User Songs in the internal memory to a USB flash drive" on page 30.
Deleting User Songs
Delete the User Songs in the internal memory or the connected USB flash drive. For details, refer to "Deleting
User Songs" on page 31.
Formatting a USB Flash Drive
Formats or initialize the USB flash drive connected to the USB [TO DEVICE] terminal. For details, refer to
"Formatting a USB flash drive" on page 50.
NOTICE
Executing the Format operation will delete all data saved in the USB flash drive. Save important data to a computer
or another storage device.
Auto Power Off
Disables or enables the Auto Power Off function (page 16).
Setting range
On
OFF
Default setting
On
NOTICE
When the instrument is communicating with other devices or the Songs are played back, the power will not be
turned off automatically. Make sure to turn off the power by pressing the [P] (Standby/On) switch when the
instrument is not in use.
AUX IN Noise Gate
The AUX IN Noise Gate function conveniently cuts unwanted noise from the sound input via the [AUX IN]
jack. By default, this is set to on, however, this may result in necessary sounds also being cut, such as the soft
decay sound of a piano. To avoid this, set this function to off.
Setting range
On, OFF
Default setting
On
Enables the Auto Power Off function. The power is automatically
turned off if the instrument is not operated for approximately
30 minutes.
Disables the Auto Power Off function. Turn off the power by pressing
the [P] (Standby/On) switch.
47
TA2 Owner's Manual
Advertisement
Chapters
Table of Contents
