Adjusting The Tempo - Yamaha TransAcoustic TA2 Owner's Manual

 Adjusting the Tempo
1
Press Button 1 [Metronome] in the UTILITY to call up the current tempo on the
display.
2
Rotate the [VOICE/VALUE] control
to adjust the tempo.
The metronome tempo can be set from 5 to
500 beats per minute. Pressing the [VOICE/
VALUE] control restores the default setting (120).
NOTE
When an Audio Song is being played back, this operation changes the playback speed (page 26). The metronome
tempo does not change.
 Selecting the time signature (Beat)
1
Press Button 1 [Metronome] in the UTILITY.
2
Hold down Button 1 [Metronome]
for three seconds to call up the beat
setting value on the display.
3
Rotate the [VOICE/VALUE] control
to select the beat.
The beat can be selected from 0 and 2 – 6. For
values other than 0, the first beat is accented
with a bell sound to signal the start of a
measure.
Pressing the [VOICE/VALUE] control can restore the default setting (0; no 1st beat accent).
Pressing Button 1 [Metronome] displays the tempo value.
NOTE
One beat is equal to a quarter note on this unit. When playing a song written in non- quarter-note units, change the
setting accordingly (for example, when playing a song in 3/2 time, set Beat to 6).
34
TA2 Owner's Manual
Hold down for three seconds.