F8. Backup Functions; F8.5 Character Code - Yamaha Clavinova CLP-265GP Owner's Manual

F8. Backup Functions

TERMINOLOGY
Backup:
You can back up some settings, such as voice selection and
reverb type, so that they will not be lost when you turn off
the power to the Clavinova.
If the backup function is turned on, the settings at power
off are effective. If the backup function is turned off, the
settings in memory are erased when you turn off the power.
In this case, when you turn on the power to the unit, the
default settings (the initial settings) will be used. (The fac-
tory setting default list is found on page 60.)
However, the backup settings themselves, the contents of
the user song recorder memory, and character code set-
ting are always backed up.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage the Function mode and select
2. Press the [+/YES] button to engage the
backup function's sub-mode, then use the
[TEMPO/FUNCTION# ▼, ▲] buttons to select
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
F8.1: Voice
F8.2: MIDI
F8.3: Tuning
F8.4: Others
Setting range:
ON/OFF
Normal setting: Voice: OFF
MIDI – Others: ON
Description of sub-modes
F8.1: Voice
• Voice
• Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume <
• Song Part Cancel Volume (
F8.2: MIDI
The MIDI functions (
(expect for the
F8.3: Tuning
• Transpose
• Tuning ( settings)
• Scale (including base note) (
F8.4: Others
• Other functions (
• BRILLIANCE setting
Factory Preset Recall
.
All Dual mode, reverb, effect, touch sensitivity, tuning
settings, and the settings affected by the Backup Func-
tions can be restored to their original factory preset val-
ues by holding the C7 key (right-most key on the
keyboard) while turning the
also erases all user song recorder data, and sets all backup
on/off settings (F8) to the normal settings. (The factory
setting list is found on page 60.)
CAUTION
Do not turn off the power of the instrument when "CLr"
appears in the display. Doing so may delete all song data
in the instrument, including external songs (page 34).

F8.5 Character Code

If the song cannot be loaded, you may need to change the
character code setting.
Setting range:
Normal setting: En
Detailed Settings – [FUNCTION]
settings>)
settings)
settings)
)
settings)
settings)
switch ON. This
[POWER]
En (English)/JA (Japanese)
CLP-265GP Owner's Manual
45