Table of Contents
Advertisement
3.7.2 Channel Status
1.
Click 3.2 Channel Status.
2.
Confirm the status of each channel referring to the descriptions below.
Status
Not Used
Initial WAN Connection Incomplete
SIP Registration Failed
Idle
Busy
Document Version 2008-10
Description
The settings for the channel are not configured, or Not Used
is selected in Channel Settings. Refer to "3.4.1 Channel &
SIP Telephony".
WAN connection is incomplete. Check the probable causes
below and make the necessary corrections:
•
Programming for the WAN interface is incorrect. Refer
to "3.3.1 WAN Interface".
•
The WAN port is not connected to the DCE (e.g., ADSL
Modem) correctly. Refer to "2.2.2 WAN Port Connection".
•
There is a malfunction on the WAN. For more information,
consult your network administrator.
After WAN connection is complete, registration to the SIP
server failed. Check the probable causes below and make the
necessary corrections:
•
The settings for the channel are incorrect. Refer
to "3.4.1 Channel & SIP Telephony".
•
The WAN port is not connected to the DCE (e.g., ADSL
Modem) correctly. Refer to "2.2.2 WAN Port Connection".
•
There is a malfunction on the WAN. For more information,
consult your network administrator.
WAN connection and registration to the SIP server are
complete. The channel is available and in standby status.
WAN connection and registration to the SIP server are
complete. The channel is being used.
3.7.2 Channel Status
Installation Manual
67
Advertisement
Table of Contents
