Table of Contents
Advertisement
2.2.2 WAN Port Connection
Connecting to Data Circuit Terminating Equipment (DCE) (e.g., ADSL
Modem)
The type of Ethernet cable (Cross/Straight) to be used depends on the type of DCE. For details, refer to
documentation for the DCE.
1.
Connect the Ethernet cable to the WAN port of the card.
2.
Connect the other end of the cable to the LAN port of the DCE.
20
Installation Manual
WAN Port
DCE (e.g., ADSL Modem)
Internet
Document Version 2008-10
Advertisement
Table of Contents
