3.4.4 Options
Local Port Settings
1.
Click 1.2.4 Options in the operation menu.
2.
Assign each parameter referring to the descriptions below.
Parameter & Description
SIP Client Port Number
Specifies the port number of the SIP-GW4 card
used for communications with the SIP server.
RTP/RTCP Port Start Number
Specifies the starting port number of the dynamic
ports used for voice communications. Starting
with this port, 100 consecutive ports can be used
as RTP/RTCP ports.
STUN Client Port Number
Specifies the port number of the SIP-GW4 card
used for communications with the STUN server.
*1
Specify different values for each parameter.
*2
For example, if the RTP/RTCP Port Start Number is "5004" (default), ports 5004 to 5103 can be used as RTP/RTCP ports.
DNS Settings
1.
Assign each parameter referring to the descriptions below.
Parameter & Description
DNS Retry Interval Timer
Specifies the length of time until a query is retried
when no response is received from the DNS
server.
Document Version 2008-10
*1
*2
*1
Default
5060
1024–65535
5004
1024–65434 (even number
only)
3478
1024–65535
Default
3 sec
1–10 sec
3.4.4 Options
Value Range
Value Range
Installation Manual
47