Table of Contents
Advertisement
3.2 Preparations
A web programming utility called the SIP-GW4 Maintenance Utility is available for programming of the
SIP-GW4 card.
System Requirements
•
Microsoft
Windows
®
Windows XP Home Edition SP2 operating system
•
Microsoft Internet Explorer
Trademarks
•
Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•
All other trademarks identified herein are the property of their respective owners.
•
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Copyright for MD5
This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5
Message-Digest Algorithm).
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.
MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.
License is also granted to make and use derivative works provided that such works are identified as "derived
from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the
derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or
the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty
of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Note
The screen may not be displayed properly when Internet Explorer settings have been changed. In that
case, confirm the settings as follows:
The example below is based on the Windows XP operating system:
1.
Confirm that the display properties DPI is set to 96 DPI. If not, restore the default setting (96 DPI).
2.
Click Internet Options from the Tools menu. Select the General tab, and click User Assistance.
Confirm that each check box is not checked for Format Setting on the User Assistance screen.
3.2.1 Preparing the PC
To prepare for programming using the SIP-GW4 Maintenance Utility, configure your PC by (1) assigning an
IP address and a subnet mask address for the same network as that of the SIP-GW4 card, and (2) choosing
the appropriate options for Internet properties.
Note
The procedures vary depending on the operating system of the PC.
This example is based on the Windows XP operating system.
Document Version 2008-10
98, Windows Me, Windows 2000 Professional, Windows XP Professional SP2, or
®
6.x
®
3.2.1 Preparing the PC
Installation Manual
23
Advertisement
Table of Contents
