2.2.2 WAN Port Connection
Note
•
Specify the IP address of the card before connecting it to the network.
•
If you use a DHCP server on a LAN network and enable the DHCP Client feature, connect the card to
the same LAN network as the DHCP server so that the card can access the DHCP server directly, not
via a router.
Connecting to a Switching Hub
When connecting the card to a switching hub, use an Ethernet straight cable.
1.
Connect the Ethernet cable to the WAN port of the card.
2.
Connect the other end of the cable to the switching hub.
Document Version 2008-10
Switching Hub
WAN Port
Ethernet Straight Cable
Router
Internet
2.2.2 WAN Port Connection
Installation Manual
19