3.2.2 Starting the SIP-GW4 Maintenance Utility
To start the SIP-GW4 Maintenance Utility, log in from your PC connected to the card by specifying the default
IP address, username, and password.
Note
•
If the SIP-GW4 Maintenance Utility is being operated during VoIP communication, it may degrade the
speech quality. Programming of the card should be avoided during calls.
•
The contents and design of the software are subject to change without notice.
Document Version 2008-10
3.2.2 Starting the SIP-GW4 Maintenance Utility
1. Start Internet Explorer from the Start menu.
2. Specify the URL of the SIP-GW4 Maintenance
Utility with the IP address
http://192.168.0.1:8000/Exp.
3.
a.
The log-in screen is displayed.
In the User name box, type INSTALLER.
b.
In the Password box, type 1234.
c.
Click OK.
Now the menu screen of the SIP-GW4
Maintenance Utility is displayed.
Installation Manual
27