3.2.1 Preparing the PC
Notice When Using a Proxy Server
If the network has a proxy server installed, you must apply the appropriate proxy settings to your PC. In this
case, follow the steps below in substitution for step 7 above:
26
Installation Manual
7.
a.
Check all boxes for Proxy server.
b.
Click Advanced.
8.
a.
Under Do not use proxy server for addresses
beginning with:, type the IP address of the LAN port
of the card.
b.
Click OK.
Your PC is now ready for programming the card through
an IP network.
Document Version 2008-10