Table of Contents
Advertisement
Ground wire from PCIII
i108-411
www.powercommander.com
7
Connect the ground wire from the
PCIII to the negative side of the bat-
tery (Fig. D).
8
Reinstall the battery cover and ECU.
9
Install the PCIII in the rear section of
the trunk using the supplied velcro
(Fig. E). Make sure to clean both sur-
faces first with alcohol.
10
Reinstall the bodywork.
11
Reinstall the main seat and the pas-
senger seat.
2001-2005 Honda CBR600 F4i - PCIII USB - 3
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Commander III USB and is the answer not in the manual?
Questions and answers