Rear Panel - FOR-A FA-1010 Operation Manual

2-2. Rear Panel

(6) (7)
LTC IN / OUT
LAN
IN 1 OUT 1
(1)
No Name
1 LAN
2 SDI IN 1-10
3 SDI OUT 1-10
4 GENLOCK IN
Ground
5
Terminal
6 AC IN 2
7 LTC IN/OUT
8 Option Slot A
9 Option Slot B
10 Option Slot C
11 Option Slot D
12 AC IN 1
Internal cooling fans prevent overheating. Do not block the front, rear or side vents
with other equipment or objects.
(8) (9)
A B
IN 2 OUT 2 IN 3 OUT 3 IN 4 OUT 4 IN 5 OUT 5
(2) Left connector.
1000/100BASE-TX Ethernet LAN port. Used to connect to an external
remote control unit or transfer data to an external device. RJ-45
3G/HD/SD-SDI video signal input connectors. Each IN and OUT 1 to 10 are
allocated as a pair. The left connectors of each pair are input connectors.
3G/HD/SD-SDI video signal output connectors. Each IN and OUT 1 to 10
are allocated as a pair. The right connectors of each pair are output
connectors.
Genlock signal input connector. Used for reference signal input (black burst
or tri-level sync). The bottom connector is for a loop through. Terminate at
75 ohm when not in use.
Used to ground the unit to protect operators from static electricity and
electrical shock.
AC power source connector. (100-240V AC 50/60Hz)(optional)
Time code input/output connector
Option card installation slot.
Option card installation slot.
Option card installation slot.
Option card installation slot.
AC power source connector. (100-240V AC 50/60Hz)
IMPORTANT
(10)
C
IN 6 OUT 6 IN 7 OU T 7 IN 8 OU T 8 IN 9
3G / HD / SD - SDI
(3) Right connector.
Description
11
(11) (12)
D
OUT 9 IN 10 OUT 10
GENLO CK IN
(4) (5)