FOR-A HVS-2000MV Installation Manual
FOR-A HVS-2000MV Installation Manual

FOR-A HVS-2000MV Installation Manual

Multi viewer expansion card

Advertisement

INSTALLATION
GUIDE
HVS-2000MV
HVS-2000 Multi Viewer Expansion Card
st
1
Edition

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HVS-2000MV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FOR-A HVS-2000MV

  • Page 1 INSTALLATION GUIDE HVS-2000MV HVS-2000 Multi Viewer Expansion Card Edition...
  • Page 2 1. Prior to Starting 1-1. Unpacking HVS-2000MV cards and their accessories are fully inspected and adjusted prior to shipment. Check your received items against the packing list below. ITEM REMARKS HVS-2000MV Multi-viewer expansion card Installation guide (This guide) 1-2. About HVS-2000MV The HVS-2000MV is a Multi-viewer expansion card specifically designed for the HVS-2000.
  • Page 3 ALARM Screw Screw POWER 3 ALARM (2) Insert the HVS-2000MV card into the second slot from the top. HVS-2000MV card (3) Tighten the two screws at both sides to secure the front panel to the chassis. HVS-2000 DIGITAL VIDEO SWITCHER...
  • Page 4 HVS-2000MV is properly displayed in the menu. ① Open [STATUS > OPTION] menu. ② Check that "INSTALLED" is displayed for HVS-2000MV. (See the figure below.) (2) Verify that the HVS-2000MV card functions properly. Assign the MV3 or MV4 channel to an AUX bus to display Multiview images.
  • Page 6 2 Executive Drive, Suite 670, Fort Lee Executive Park, Fort Lee, NJ 07024, USA Tel: +1 201 944 1120 Fax: +1 201 944 1132 FOR-A Corporation of America Distribution & Service Center 2400 N.E. Waldo Road, Gainesville, FL 32609, USA Tel: +1 352 371 1505...

Table of Contents