Reference Manual
Ed 22
Handling
The MAS 2600 transducer is a highly sensitive electronic piece of equipment and proper handling is
most important.
To avoid damaging the transducers:
•
NEVER lift by the cable if transducer is mounted with fittings.
•
NEVER remove the protection cap in front of the diaphragm before installation.
•
NEVER knock the transducer.
•
NEVER apply pressure to the diaphragm in any way whatsoever, whether using fingers, tools or
sharp objects.
•
NEVER use sharp objects when cleaning the diaphragm.
•
NEVER submerge the cable so that the breather tube is under water.
•
NEVER bend the cable in a radius of less than 90 mm.
34
MAS2600: Installation
January 2017