MAS2600: Installation
December 2013
Handling
The MAS 2600 transducer is a highly sensitive electronic piece of equipment and proper
handling is most important.
To avoid damaging the transducers:
•
NEVER lift by the cable if transducer is mounted with fittings.
•
NEVER remove the protection cap in front of the diaphragm before installation.
•
NEVER knock the transducer.
•
NEVER apply pressure to the diaphragm in any way whatsoever, whether using fingers,
tools or sharp objects.
•
NEVER use sharp objects when cleaning the diaphragm.
•
NEVER submerge the cable so that the breather tube is under water.
•
NEVER bend the cable in a radius of less than 90 mm.
Reference Manual
RM 6000-01-001-24
35